Archive | SNAG’s EIM 2016

Finishing the SNAG Exhibition In Motion Collaboration

With all the felting for the piece completed, I sent all the individually worked components back to Sarah West in Raleigh. Sarah had to finish brazing the metal forms that she had left incomplete so that I could manipulate them under my sewing machine pressure foot to free-motion embroidery the felt panel on each. To protect the white felt from getting dirty as well as from burning in this process, she wrapped the felt panel in plastic first and then covered it with wet paper towels. Brilliant!




















Sarah came to Asheville with all the components and we arranged them on a body form, marking which pieces would be connected together. She then returned to her studio to prong set the pieces of vinyl and to link all the components. At this point, I was leaving the country to teach workshops in Santiago, Chile and had to pass off the remaining responsibilities to her.  I am grateful for her final push to complete the piece, find an excellent model and photographer, coalesce our processes and concepts about the piece into a coherent statement and submit the work on time.








Our Artists’ Statement:

This piece uses the interplay of steel and felted wool to create a transformation of materials into a wearable protective shield. The shoulder components were created by encasing the underlying brazed steel structure in a seamless skin of wet felted wool fiber. As the felt shrunk, the forms compressed to alter their original shape, suppressing movement and sound. The work further eliminates sound by introducing pieces of vinyl from a heavy metal record. The free-motion embroidery is both inspired by the pattern of the record and the intensive energy of the music. In the act of wearing it, there is a final transformation from an individual’s natural state to one that is powerfully guarded.


Bringing the SNAG Exhibition in Motion Collaboration to Fruition: Part 2

When it came time to encase the large angular shoulder pieces in a continuous skin of felt, I had some trepidation as they were the largest forms I had tried to skin and were also more pointy than previous objects I had worked. I had two viable options. One option was to create a 2-D template far larger than the form to allow for the high shrinkage needed to create a thin felt skin.  I could lay the wool around the template and after initial felting I could make a cut in the skin, remove the template,  insert the metal armature, stitch up the cut and proceed with fulling the felt taut around the form. I was concerned with this method because the felt would be very delicate when I inserted the metal form in order to assure I could seal the large cut without visual evidence. I feared the points would puncture the felt.



Instead, I chose to wrap each metal shoulder armature in many layers of plastic sheeting to enlarge the surface area three-dimensionally. In this method the armature is already inside so my cut would be very small, only big enough to allow me to remove the smaller pieces of plastic one at a time. I could agitate the felt as I reduced the amount of plastic inside the skin providing space for shrinkage little by little without the metal points coming in contact with the delicate felt.  I avoided shrinking the area of the small opening to keep the felt less integrated so that when all the plastic was removed I could draw the cut closed with a basting stitch and the wool fibers would still felt together, bridging the cut.


High Shrinkage SNAG EIM


I continued felting the skin until it was nearly fulled and taut against the metal armature. I cut two slits where I needed to have the metal exposed so that Sarah West could connect the shoulder pieces to the metal forms encircling the neck.  I then hand stitched the felt skin around the wire structure to give the form more angular definition.



Bringing the SNAG Exhibition in Motion Collaboration to Fruition: Part 1

I am doing a little retrospective blogging of this project, as there just wasn’t time to post during the time of making and SNAG’s Exhibition in Motion fashion show of large scale sculptural works is this Saturday, May 21 from 8-9 at the Grand Ballroom of the Renaissance Hotel in downtown Asheville!

robotAfter our initial experimentation with the incorporation of my felt skin encasement techniques over her steel wire forms (see prior posts), Sarah West and I had a phone conversation to devise our collaborative piece. One of our sample structures fit the curvature of a shoulder and was reminiscent of the high shoulder pads popular in the 80’s that alluded to the defensive strength of a football uniform’s shoulder padding or the angular shaped shoulders of the Transformers, a robotic toy line, also from the 80’s. Remember these!! We decided to pursue a large neckpiece incorporating oversized shoulder pieces and Sarah began making the structure.





1-1We had decided that the shoulder pieces and some of the faceted gem shape components would be covered completely in a skin of felt.  While others only a singular plane would be free-motion embroidered felt (a technique characteristic of my work) or pieces of prong set vinyl record (a signature of Sarah West’s work). The forms intended for a singular plane of felt couldn’t be completed initially or I wouldn’t be able to fit them under my sewing machine’s arm to embroider them. Sarah had shown me some of her vinyl collection during a previous visit and we decided on this black and white patterned heavy metal record, which inspired my stitching.








SNAG Collaboration Explored at the Hambidge Center Residency: Part 3

My previous blog entries about the SNAG EIM collaboration I am working on with Sarah West shared two approaches to encasing her 2-D steel frames in felt and then applying free-motion embroidery to that felt. These structures, however, were simplified components of Sarah’s striking, faceted gem forms on which she sets and manipulates pieces of vinyl records. The other approach we discussed for our preliminary explorations of combining our mediums and techniques was to, not only, entirely encase a single form, but many of them linked together.

IMG_7602I determined the surface area of the form and calculated how much larger that area needed to be and how much wool to apply in order to achieve the % of shrinkage and quality of felt I desired.











Once felting had commenced, I removed the plastic and continued to agitate the felt until it shrunk down, snug against the steel armature. The felt compressed the chain of interlinked forms, eventually suppressing its movement and the sound of that movement. I, then, hand stitched the felt around the wire to delineate the armature.


The felt encased steel structures, along with some sketches of more formal ideas I had during the making process, have been sent to Sarah. I look forward to hearing her thoughts so we can take the next steps: becoming clearer on our concept, the structure of the steel forms, the parts that will be encased in felt or set with vinyl, the surface design for the stitching, how large our format will be and how or where it will be worn. So very exciting!



SNAG Collaboration Explored at the Hambidge Center Residency: Part 2

In my second attempt to envelop Sarah West’s steel structures in felt for our collaboration for SNAG’s Exhibition in Motion, I used a process similar to that explained in this prior blog entry describing a different study I made during my Hambidge Residency.  After enlarging the surface area of her steel frame based on my shrinkage calculations and covering the plastic form with the calculated amount of wool fibers, I began the felting process and removing the plastic to allow the shrinkage of the encasement.










The hollow form is very large compared to the frame it will eventually encase because I wanted to create high-shrinkage felt. The more the wool can entangle and shrink the less vulnerable it is to abrasion and the thinner, more skin like the felt is when it is completely shrunk or fulled. If I didn’t intend to free-motion embroidery the felt, this would be my preferred approach because the felt is very strong and stable as is because of the high shrinkage in comparison to the approach described in this prior posting, where the wool suspended across the frame hasn’t been able to shrink much and is vulnerable to pilling and puncture.


SNAG Collaboration Explored at the Hambidge Center Residency


The second project I began working on while in the Hambidge Residency is a collaboration. I had recently partnered with a metal artist, Sarah West, from Raleigh, NC to create a piece of large scale wearable sculpture for an event, Exhibition in Motion. This runway fashion show is a component of SNAG’s (Society of North American Goldsmiths) national conferences, the next being SNAGnext in Asheville, NC in May 2015. Sarah and I both show our work at Mora Contemporary Jewelry in Asheville as well as at LIGHT Art +Design in Chapel Hill, so naturally, with my pursuit of metal armatures for my felt work, I became intrigued with the idea of covering Sarah’s forms as soon as I was familiar with her work. I was passing through Raleigh in late November and so we managed to arrange our first brainstorming in her studio. We discussed the forms she creates and how I might approach covering them in a taut skin of felt as well as how her forms would need to be modified if I was to be able to apply free-motion embroidery to the felt skin shrunk around the wire frame. I brought this collection of steel structures along with me to the Hambidge Center, sprayed them with an enamel to prevent rusting from the soap and water used in the felting process and was delighted with three possible directions for our collaboration.

IMG_7600IMG_7644The first technique I applied was to wrap the wire frame with wool fiber and then lay fibers across the interior of the frame and proceeded with felting the wool. The structure was able to fit and be moved around under the sewing machine foot and I adore how the single line, black stitching mirrors the linear steel structure.